Folding Magnetic Dice Tray Bundle: Green Cthulhu Setup

By Norse Foundry | Premium RPG Dice Sets | DND Dice | 100 | Published: 2026-11-04

Category: Guides pratiques

Set up your Green Cthulhu dice tray and tower bundle in five steps, with checkpoints to avoid wobbly rolls and misaligned magnets.

Quick answer

Unfold the tray on a flat, non-slip surface, align the magnetic edges until they click, then place the tower at the tray’s back edge so dice land inside. Check that the tower base sits flush and the tray corners are square before your first roll.

Why the surface matters more than the magnets

Magnetic edges hold the tray’s shape, but they do not grip the table. A smooth or tilted surface lets the whole bundle slide mid-roll, especially when the tower adds height. Choose a level, slightly textured table or place a rubber mat underneath. Avoid soft surfaces like beds or cushioned play mats—they let the tray flex and the tower tip.

When to separate the tower from the tray

The bundle is designed to work together, but you can use the tray alone for quick rolls or when table space is tight. If you separate them, store the tower upright or lying on its side with the opening facing up to avoid stress on the Cthulhu motif. Reattach only when the tray is fully flat and the magnets are clean.

Setup steps for the Green Cthulhu bundle

Clear and level the table: Wipe the table dry and check it with a level app or a glass of water. Place a non-slip mat if the surface is glossy. A tray that slides even slightly will misalign the tower during play.
Unfold the tray and align the magnets: Open the tray flat and bring the magnetic edges together slowly until you feel them pull. Press along each seam to seat them. Forcing the magnets can leave a gap that lets dice catch on the rim.
Press the corners square: Push down on each corner and check that the tray sits flat with no rocking. If a corner lifts, re-seat the magnets. A twisted tray makes the tower lean and dice roll off-course.
Position the tower at the back edge: Set the tower on the tray’s rear edge, centered left to right, with the dice exit facing the tray’s open area. The tower base should sit flush on the tray floor. Off-center placement sends dice into the side wall and reduces roll randomness.
Test with three rolls: Drop a single die through the tower three times. If it bounces out or stops short, adjust the tower angle or move the tray away from table edges. If dice still escape, check that the tray is fully unfolded and the tower is not overhanging the rim.

Bundle details

Dice Tray / Tower Bundle: Green Cthulhu: The dice tower features a detailed Green Cthulhu motif and works with the matching tray to keep dice contained. The tower controls the roll direction, so placing it correctly at the tray’s back edge keeps dice from bouncing out.
Dice Tray / Tower Bundle: Green Cthulhu